1) epoxy transparent compound
2) For rigid LED strips potting
3) Making transparent crafts yourself
Transparent compound for rigid LED strips potting
EP-701 is water clear, two-part, solvent-free epoxy resin, cured in room temperature or heat condition, easy to operated, many applications.
The cured resin shows bright smooth and rigid surface, excellent mechanical strength, electrical
properties, water proof property. It is widely used in
1) Rigid epoxy doming & coating, both clear and color type.
2) Rigid LED strips potting & encapsulation
3) LED display and LED & letter sign
4) Clear and colorful crafts making
Mix Ration (weight)
Mix Viscosity cps/25℃
Pot Life (25℃/100g)
25℃/10~24 hr or 60℃/2 hr or 80℃/30min
Hardness (Shore D)
Volume resistivity ohm-cm 25℃
Surface resistivity ohm 25℃
Proof voltage 25℃ Kg/mm2/cm2
Impulse strength mm/mm *℃
Water absorption (25℃*24 hr)%
Permitivity ℃ 1KHZ
USAGE FOR POTTING & DOMING & ENCAPSULATION
1. Keep the goods which wants to pot dry and clean.
2. Mixing the part A and part B exactly by the weight ratio of A:B=2:1. The glue should be stirred fully
after the mixed.
3. Please use promptly after the glue has been stirred fully, and use up the mixed glue in up time.
For example, you mix 200g glue, you should use up it in 1hour, the more you mixed, the less up time.
4. After potting, the glue will gradually infiltrate to the gaps, so you can potting one more time if
5. Cured: 25℃/10~24 hr or 60℃/2 hr or 80℃/30min. the temperature had better don’t exceed 100℃.
6. During curing, please keep the environments cleaning to avoid the dirt dropping into the uncured
7. Please make sure the seal well after use, especially for part B.
8. Please notice for basic safety measures.