One component, fast curing, thermal conductive adhesive non-fluid white RTV silicone casting rubber
SC-1106 is a one-component, fast curing RTV silicone rubber, which uses moisture in the air to form to flexible silicone rubber. SC-1106 has good thermal conductivity and flame-retardant capabilities for metals, plastics, ceramics, and has excellent non-corrosive capabilities. It is without primer coating.
1. Take off alcohol, it is low odor, non-toxic and non-corrosive
2. Good thixotropy, fast curing.
3. With various substrate adhesion without primer coating.
4. Thermal conductivity function, thermal conductivity coefficient can be 0.85W / (m * K).
5. Flame-retardant, the level up to FV-0.
6. Excellent heat-resistance and cold-resistance.
7. Excellent electrical properties and weather-resistance.
8. One-component, easy to use.
White non-flow paste
Surface dry time
Cured(7days,23°C / Relative Humidity
Elongation at break
Insulation breakdown strength
Clean surface, remove rust, dust and oil and so on. Operation is complete, unused glue cap should be tightened immediately, kept under seal. Again, if the seal has a little crust, its removal can not affect normal use. Gel during storage, pipe mouth may also be a small amount of the curing phenomenon, to clean it after normal use, does not affect product performance.
1. In a dry and cool place, avoid direct sunlight.
2. Reach of children.
3. Clean the surface to get the best adhesion.
4. The full curing time is generally 72 hours.
5. Please wear the protective glasses when operate.
6. In case of contact with eyes, please clean with water, and go to hospital.