Arbitrary bending PU potting adhesive for LED strip

FOB Reference Price:Get Latest Price
US $15-20 / Kilograms | 5 Kilogram/Kilograms (Min. Order)
Report Suspicious Activity
Overview
Quick Details
CAS No.:
mixture
Place of Origin:
Fujian, China (Mainland)
Classification:
Double Components Adhesives
Main Raw Material:
Polyurethane
Usage:
doming potting coating LED strip
Brand Name:
APS
Model Number:
PU-248
Color:
water clear
Packaging & Delivery
Packaging Details
5kg/drum, 20kg/drum
Port
xiamen
Lead Time :
5-15days

Specifications

1) Arbitrary bending PU potting adhesive
2) transparent, for soft LED strip potting
3) UV, weather and yellow resistant

 

      Arbitrary bending PU potting adhesive for LED strip

 

 

 

INTRODUCTION                                                               

 

PU-248 is a two-component, colorless clear, flexible, very soft, low viscosity, fast cure liquid polyurethane resin; it has excellent UV and yellow resistance property, weather resistant and anti-aging, form a bright crystal clear and smooth surface after cured. It is widely used in doming, casting, encapsulation, potting, and non-yellowing coating and so on , especially the soft LED strip.

 

UNCURED PROPERTIES                                                       

 

Item

PU-248A

PU-248B

Appearance

Colorless clear liquid

Colorless to yellowish liquid

Viscosity cps/25°C

3000 ±100

150 ± 50

Shelf life (month)

6

6

Mixing Ration (by weight)

A:B=1:1

Pot Life (at 25°C)

30min (for 200g mixture)

Cure condition

60°C×2.5h

 

CURED PROPERTIES                                                          

 

Item

PU-248

Appearance

Transparent and flexible

Hardness (Shore A)

30±5

Tensile strength (Mpa)

2

Elongation (%)

200

Volume resistivity (ohm-cm)

>1015

 

OPERATION DETAILS                                                         

 

It is very important to maintain the humidity of the operating environment. We recommend please do the operation as follow.

  1. Pre-Processingthe base material which need to doming/potting/coating: put it into the 60°C oven to remove the moisture on the surface.
  2. Keep the container clean and dry which used to mixing the adhesive.
  3. Take the correct mix ratio amount of part A and part B, A:B=1:1 (by weight).
  4. Stir the mixture uniformly, and then do the operation of take off the gas immediately (use the vacuum pump to de-foaming), until there is no bubble on the surface of liquid.
  5. Please use up the mixture within the operation time, the more quantity of mixing, the less operation time.
  6. The operation of potting/doming: don’t potting in a high height, don’t potting in many different areas, just take a standpoint and potting the glue slowly. Doming: use clean needle to doming. If use the tube package product, just connect the mixing tube and doming, the usual thickness is about 2mm, observe the surface within 5min after doming, use the needle to remove the small bubbles if there have.
  7. Curing condition and time: 60°C×2.5h.
  8. During curing, please keep the environments cleaning to avoid the dirt dropping into the uncured glue.
  9. It is very important to seal the part A and part B well after use. And please take the basic protective measures when operation.